<h2>Subminiature-C Vacuum Round Cable Assemblies</h2><p><strong>Connector to Cable</strong> Vacuum assemblies are fitted with PEEK subminiature-C female or male connectors at one end, and nine, non-terminated, color coded Kapton insulated wires at the other. The female cable connectors mate directly onto the vacuum-side of <a href="https://www.accuglassproducts.com/subminiature-c/cf-feedthroughs">submi… UHV feedthroughs</a>, <a href="https://www.accuglassproducts.com/subminiature-c/iso-kf-lf-feedthroughs… HV feedthroughs</a>, or with <a href="https://www.accuglassproducts.com/connector-cable-male-uhv-service">male in-vacuum cable connectors</a>. The cable jacket is a PEEK braid with a nominal diameter of 0.14 inches. The nine wires are Kapton® insulated 28 AWG silver plated copper conductors, stranded 7 x 0.005.</p><p><strong>Connector to Connector Extension Cables</strong> are fitted with PEEK subminiature-C female connectors on both ends of a 19-inch UHV Ultra-High Vacuum round cable.</p><p><strong>Contact to Cable</strong> UHV round cable assemblies include crimped male or female contacts on one end, and nine, non-terminated, Kapton insulated leads at the other.<br><span style="color:rgb(255, 0, 0);"><strong>Caution:</strong> 'contact to cable' assemblies do not include PEEK connectors and will not allow subsequent connector installation, as wires must be threaded through connector back-piece before crimping contacts.</span></p><h3>UHV Subminiature-C (Sub-C) Cable Specifications</h3><ul><li>Subminiaure-C 9-pin interface</li><li>High temperature rated to 250ºC (Feedthrough)</li><li>UHV compatible construction</li><li>PEEK connectors with locking screws</li><li>Voltage rating: 500 VDC max.</li><li>5 AMPs per pin (20% of pins at any given time)</li><li>Pins: Au plated, Ni-Fe alloy</li><li>UHV rated 1x10<sup>-10</sup> Torr</li></ul><p> </p>
Subminiature-C Vacuum Round Cable Assemblies
AGP vacuum compatible connector-to-cable assemblies are fitted with PEEK Subminiature-C female or male connectors on one end, and nine non-terminated color-coded leads at opposite end. Female cable connectors mate directly to the vacuum side of all Subminiature-C UHV and HV feedthroughs, and/or with other PEEK male connector fitted extension cables. The cable’s outer jacket is a woven PEEK monofilament braid producing a nominal outer cable diameter of 0.14 inches. These cable assemblies are fitted with nine, Kapton® insulated 28 AWG leads, each of which is composed of seven 0.005 diameter twisted strands of silver-plated copper wire.
AGP also offers connector-to-connector, female/female UHV rated extension cable assemblies that are 19-inches in length, fitted with PEEK Subminiature-C female connectors at both ends.
Contact-to-cable UHV cable assemblies are an economical in-vacuum connectivity solution, wherein contacts are individually pushed-on to their corresponding feedthrough pins. They are ideally suited for applications requiring single and/or infrequent connection cycles. These UHV cable assemblies are fitted with crimped male or female contacts on one end, and with non-terminated, Kapton insulated, leads at the other.
Caution: Please note that contact-to-cable assemblies are an economical connectivity solution, as such these cables do not include PEEK connectors, nor will they allow PEEK connector installation at a future date. Crimped contacts are too large for insertion through the PEEK connector’s back-piece. Generally, cable wires must be threaded through the connector’s back-piece before contacts are crimped to their respective wires.
Features
- Subminiature-C 9-Pin Interface
- High temperature rated to 250°C
- UHV compatible construction
- Kapton® Insulated Vacuum Cables
- PEEK Connectors with Locking Screws
- Custom Solutions on Request
Specifications
| Electrical 1, 2 | |
| Voltage | 500VDC |
| Current | 5A |
| Material | |
| Connector 3 | PEEK |
| Braiding, Monofilament | PEEK |
| Insulation, Wire | Kapton |
| Wire, 7x.005 Stranded | Ag-Plated Cu |
| Vacuum Range 4 | |
| UHV, Ultrahigh Vacuum | 1x10-10 Torr |
| Temperature Range 4 | |
| Connector / Wire | -75 to 250°C |
| Notes |
- Electrical ratings are maximum test values, with feedthrough's vacuum side at ≤ 1x10-4 Torr. Feedthroughs are intended for instrumentation applications carrying low level signal voltage and current.
- For proper heat dissipation, a maximum of 20% of the pins on a feedthrough may carry the maximum pin current at any given time.
- PEEK is a polyether ether ketone thermoplastic.
- Overall assembly ratings must be adjusted to that of its lowest rated component. For cryogenic service, the lowest recommended temperature is -75°C