Flat D-Sub Ribbon Cable Assemblies
Connector to Cable (UHV) Ultrahigh assemblies are fitted with PEEK subminiature-D female or male connectors at one end and non-terminated, Kapton® insulated ribbon cables at the other. The female cable connectors mate directly onto the vacuum-side of subminiature-D UHV feedthroughs, HV feedthroughs, HV Bulkhead-D feedthroughs, or with subminiature-D PEEK and Macor connectors.
Contact to Cable UHV ribbon cable assemblies include male or female contacts on one end and non-terminated, Kapton® insulated ribbon cable at the other. Special Note: They do not include PEEK connectors. The 50-pin contact-fitted cable will not allow subsequent connector installation. Wires must be threaded through the 50-pin connector back-piece before crimping contacts.
Connector to Connector Extension Cables are fitted with a PEEK subminiature-D female connector on one end and a female OR male PEEK subminiature-D connector on the other end of a 19" or 39" UHV ribbon cable.
Sub-D Ribbon Cable Specifications
- Subminiature-D 9, 15, 25, 50-pin interface
- High temperature rated to 250°C (Feedthrough)
- UHV compatible construction
- PEEK connectors with locking screws
- Voltage rating: 500 VDC max.
- 5 AMPs per pin (20% of pins at any given time)
- Pins: Au plated, Ni-Fe alloy
- UHV rated 1x10-10 Torr