Coaxial MHV Connectors and Components
Components in this MHV section are sold as the most basic components.
UHV MHV Connectors listed above are designed for use with Accu-Glass Products' TYP6, 26 AWG Kapton insulated coaxial cable ( PN-100720). The use of any other coaxial cable will require modification to some of the supplied components. For this reason, the use of other coaxial cables is not recommended.
MHV Coaxial Interface
The 'Miniature High Voltage' connector interface is designed for low noise 50-ohm lines requiring higher voltage than is possible with a standard BNC interface. MHV coaxial feedthroughs are constructed in both grounded and floating shield configurations. Floating shield types provide two concentric conductor paths: an outer metal conductor tube (shield) concentric with, and enclosing, a cylindrical center conductor pin. Both paths are electrically isolated from each other and a mounting flange. Grounded shield MHVs provide only one path that's electrically isolated from the flange; where grounded shield and flange are electrically common. Vacuum side of single-ended grounded and floating MHV feedthroughs have a 0.094 inch (2.4-mm) diameter conductor pin that mates with grounded or floating AccuFast™ connectors.
MHV Connector Features
- MHV Coaxial interface
- Grounded and Floating Shield
- Single and Double Ended configurations
- Kapton® insulated 50-Ohm cable
- High temperature rated to 250°C
- UHV compatible construction
- Conflat® and ISO KF compatible mounts
- Air service cables/connectors
- Custom solutions on request